Shoe GOO Adhesive-Clear-3.7 fl oz

You looking to find the "Shoe GOO Adhesive-Clear-3.7 fl oz" Good news! You can purchase Shoe GOO Adhesive-Clear-3.7 fl oz with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $5.99 $3.97   

Product Feature

• Rebuild worn out shoes soles
• Coat shoelace ends to stop fraying
• Secure loose insoles and repairs damaged heels
• Prevent premature wear on skate shoes
• Made in the USA
• Coat and protect shoes and gloves
• Contact adhesive and sealant
• Rebuild worn-out soles
• Seal rubber & work boots
• Water-proof

Product Description

Shoe GOO® is specially designed to repair, seal and stick to a wide variety of materials with superior strength. The unique formula contains is designed for strong abrasion resistance and better adhesion to flexible materials. It’s ideal for repairing worn soles, coating shoes to prevent premature wear and sealing galoshes, waders or rubber boots. Use on plastic, metal, leather, vinyl, rubber and canvas.

Shoe GOO Adhesive-Clear-3.7 fl oz Review

Instructions:

(1) Make sure your Goo purchase is recent. The shelf life in your garage is not long.
(2) Have both the shoes and Goo at room temperature. There are handling and curing problems if you deviate from this ideal.
(3) Lay out more newspapers than you think and get a few paper-towels handy.
(4) Buy a big bag of rubber bands unless you have quite a few sizes already (important).
(5) Using a small wire-brush (toothbrush style is best) clean out the area to be glued. Do this outside. Get out all the dirt and sand, and also rough-up the surfaces. You can't glue to dirt, and any little pebbles will be in there forever. Shoe must be completely dry (place held open over a heater vent for 24-hours if need be).
(6) Goo glue it up. Be generous, but not too generous. Be particular careful to fully coat both surfaces at the edges of the shoe.
(7) Rub the outside surfaces to squish the Goo around inside the sole.
(8) Start putting on the rubber bands. You need a lot. Space them every quarter inch or closer on the glued edge.
(9) The shoe parts have a tendency to open up, even with the rubber bands, so check again in 10 and 30 minutes. Add more rubber bands if needed.
(10) Let sit inside for 24 hours. Or more.

Voila! Fixed shoes.

I clean my fingers with paper towels. You might try something nastier, if you want.

PS: This review is not "certified purchase" because the SKU I bought seems to be discontinued on Amazon.

Most of the consumer Reviews tell that the "Shoe GOO Adhesive-Clear-3.7 fl oz" are high quality item. You can read each testimony from consumers to find out cons and pros from Shoe GOO Adhesive-Clear-3.7 fl oz ...